Experimental Study: The Impact of Cost Information and Process Selection on Sustainable New Product Design

Arsy Najwa Hadaina; Dyah Ekaari Sekar Jatiningsih

doi:10.37385/ijedr.v6i2.7238

Authors

Arsy Najwa Hadaina Universitas Muhammadiyah Yogyakarta
Dyah Ekaari Sekar Jatiningsih Universitas Muhammadiyah Yogyakarta

DOI:

https://doi.org/10.37385/ijedr.v6i2.7238

Keywords:

Cost information, Process Selection, Total cost, Sustainable New Product Design, cost efficiency

Abstract

This study examines the effect of cost information and process selection on total costs in sustainable new product design. This study uses an experimental design with the research objective to evaluate how these two variables contribute to cost efficiency and greener product innovation. To achieve this goal, students of the Accounting Study Program from the Faculty of Economics and Business, Universitas Muhammadiyah Yogyakarta as a substitute for professional designers in the development of new products were asked to fill out a questionnaire to evaluate their design choices, consider the sustainability aspects, and identify the challenges they faced during the process. The interaction effect was also assessed to review the correlation effect of these factors on sustainable product design, with the results showing that the interaction effect of the two variables has a significant impact on the total cost, supporting the hypothesis that the combination of these two factors is important in creating cost efficiency in sustainable product development

References

Adi, H. K. (2022). Kajian Manajerial efektifitas pemeliharaan jaringan distribusi menggunakan uji ANOVA. Jurnal Teknik Mesin Sinergi, 20(2), 225–232. https://doi.org/10.31963/sinergi.v20i2.3610

Ahmad, S., Wong, K. Y., Tseng, M. L., & Wong, W. P. (2018). Sustainable product design and development: A review of tools, applications and research prospects. Resources, Conservation and Recycling, 132,49–61. https://doi.org/10.1016/j.resconrec.2018.01.020

Booker, D. M., Drake, A. R., & Heitger, D. L. (2007). New Product Development: How cost information precision affects designer focus and behavior in a multiple objective setting. Behavioral Research in Accounting, 19(1), 19–41. https://doi.org/10.2308/bria.2007.19.1.19.

Dekker, H., & Smidt, P. (2003). A survey of the adoption and use of target costing in Dutch firms. International Journal of Production Economics, 84(3), 293–305. https://doi.org/10.1016/s0925-5273(02)00450-4

Delaney, E., & Liu, W. (2023). Managing Design for Environmental Sustainability throughout the Design Process. Design Management Journal, 18(1), 48–62. https://doi.org/10.1111/dmj.12087

Elliott, W. B., Hodge, F. D., Jollineau, S. J., & Pronk, M. (2006). Are MBA students a good proxy for non-professional investors? SSRN Electronic Journal. https://doi.org/10.2139/ssrn.589521

Ellram, Lisa & Tate, Wendy & Choi, Thomas. (2020). The Conflicted Role of Purchasing in New Product Development Costing. Journal of Supply Chain Management. 56. 10.1111/jscm.12217.

Hardani et al. (2020) METODE PENELITIAN KUALITATIF & KUANTITATIF. 1st edn. Edited by H. Abadi. Yogyakarta: CV. Pustaka Ilmu.

Hughes, C. T., & Gibson, M. L. (1991). Students as surrogates for Managers in a decision-making environment: an experimental study. Journal of Management Information Systems, 8(2), 153–166. https://doi.org/10.1080/07421222.1991.11517925

Irwan, I., Nurman, T. A., & Sukardi, R. (2021). Kapabilitas Proses Packing Semen Dengan Menggunakan Statistikal Quality Control (Studi Kasus: Pt. Semen Bosowa Maros). Teknosains Media Informasi Sains Dan Teknologi, 15(1), 58. https://doi.org/10.24252/teknosains.v15i1.17457

Jatiningsih, D. E. S. (2015). EXAMINING THE INTERACTION EFFECT OF COST INFORMATION TYPES AND STRATEGY ON THE EFFECTIVENESS OF NEW PRODUCT DEVELOPMENT?: AN EXPERERIMENTAL STUDY. http://repository.umy.ac.id/handle/123456789/27808.

Jatiningsih, D.E.S. (2021) Tipe Informasi Biaya Dan Strategi Pengujian Eksperimental Terhadap Efektivitas Pengembangan Produk Baru. Yogyakarta.

Kasnawati , K. ., Sampe, R. ., Kusdiah, Y. ., & Sriwati, M. . (2024). Pengembangan Teknologi Mesin Otomatis Untuk Peningkatan Produktivitas Dalam Industri Manufaktur. Jurnal Review Pendidikan Dan Pengajaran (JRPP), 7(4), 15300–15306.

Klapperich, H., Uhde, A., & Hassenzahl, M. (2020). Designing everyday automation with well-being in mind. Personal and Ubiquitous Computing, 24(6), 763–779. https://doi.org/10.1007/s00779-020-01452-w

Mustajib, M. I. (2010). Model Simultan Penentuan Toleransi Komponen Produk Rakitan dan Pabrik dalam Kolaborasi Manufaktur Make-to-Order. Jurnal Teknik Industri: Jurnal Keilmuan Dan Aplikasi Teknik Industri, 12(2), 109–118. https://doi.org/10.9744/jti.12.2.109-118

Muttaqin, B. I. A. (2019). Telaah Kajian dan Literature Review Design of Experiment (DoE). Journal of Advances in Information and Industrial Technology, 1(1), 33–40. https://doi.org/10.52435/jaiit.v1i1.10

Pomatto, L., Strack, P., & Tamuz, O. (2018). The cost of information: the case of constant marginal costs. arXiv (Cornell University). https://doi.org/10.48550/arxiv.1812.04211

Ratnasari, D., Tulaini, S., Setyawan, H., & Suari, N. M. I. P. (2019). Studi pemilihan proses pabrik gliserol monostearat. Jurnal Teknik ITS, 8(1). https://doi.org/10.12962/j23373539.v8i1.41477.

Soedrajat, Soegito (2010) Administrasi Biaya. In: Manajemen dan Sistem Informasi Biaya. Universitas Terbuka, Jakarta, pp. 1-42. ISBN 9789790119888

Ummah, N. H., & Dahda, S. S. (2022). Analisis efektifitas kinerja mesin cutting manual dan otomatis menggunakan metode OEE (Overall Equipment Effectiveness ) di PT. XYZ. Jurnal Teknik Industri Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 8(2), 345. https://doi.org/10.24014/jti.v8i2.19765

Universitas Sangga Buana YPKP. (n.d.). The Role Of Acceptance In Expediting Export Payment Transactions Using Usance Documentary Credit - Universitas Sangga Buana | Repository. http://repository.usbypkp.ac.id/id/eprint/351

Waage, S. A. (2007). Re-considering product design: a practical “road-map” for integration of sustainability issues. Journal of cleaner production, 15(7), 638–649. https://doi.org/10.1016/j.jclepro.2005.11.026

Yang, Q., & Song, B. (2006). Eco-design for product lifecycle sustainability. Paper presented at the 2006 4th IEEE International Conference on Industrial Informatics.

Yarasi, P. 2011. Productivity improvement of a manual assembly line. Texas A&M Univ., Texas, Master’s Thesis.

Yunitri, N., Janitra, F. E., Kustanti, C. Y. ., Nur Aini, Tiara Octary, Melati Fajarini, Yani Sofiani. (2024). Metode Penelitian Eksperimental. Jurnal Kesehatan, 11(2), 67–79.