Application of E-Glass Jute Hybrid Laminate Composite with Curved Shape on Compressive Strength of Cylindrical Column Concrete
DOI:
https://doi.org/10.37385/jaets.v5i1.2072Keywords:
Woven Jute Fabric, Curve Laminate Composite, Hybrid Laminate Composite, Compression StrengthAbstract
This study provides a better understanding of reinforcing cylindrical concrete columns (CCC) using a hybrid laminated composite material (HLC) composed of jute and e-glass fibers, including the influence of layer quantity on strength and a comparison with previous research. The utilization of these alternative materials may lead to the development of novel and efficient solutions for constructing durable and robust structures. The primary objectives of this research are to assess the effects of employing HLC as a reinforcing layer on CCC compressive strength, optimize the reinforcement process by selecting appropriate layer sequences and types, and analyze the type of fiber damage in relation to the strength of HLC composite material. The materials utilized in this study encompass woven jute fabric sheets, e-glass fiber sheets, and epoxy resin. Compressive strength testing was conducted following ASTM C39 standards. Specimen variations were based on the number and type of reinforcing layers. The results revealed that CCC compressive strength increased by up to 100% with the application of up to three layers of jute compared to an unlayered specimen. Furthermore, CCC compressive strength experienced a remarkable enhancement of up to 150% with the incorporation of HLC composite. Hence, the implementation of HLC demonstrates significant potential for augmenting the strength of concrete structures.
Downloads
References
Abir, N., Siddique, A. B., Begum, H. A., Gafur, M. A., Khan, A. N., & Mahmud, M. A. (2023). Effect of fibre loading on mechanical properties of jute fibre bundle reinforced gypsum composites. Heliyon, 9(7). https://doi.org/10.1016/j.heliyon.2023.e18147
Baley, C., Bourmaud, A., & Davies, P. (2021). Eighty years of composites reinforced by flax fibres: A historical review. In Composites Part A: Applied Science and Manufacturing (Vol. 144). Elsevier Ltd. https://doi.org/10.1016/j.compositesa.2021.106333
Berenguer-Rico, V., & Nielsen, B. (2023). Normality testing after outlier removal. Econometrics and Statistics. https://doi.org/10.1016/j.ecosta.2023.06.001
Chau, K. Y., Moslehpour, M., Tu, Y. Te, Tai, N. T., Tien, N. H., & Huy, P. Q. (2022). Exploring the impact of green energy and consumption on the sustainability of natural resources: Empirical evidence from G7 countries. Renewable Energy, 196, 1241–1249. https://doi.org/10.1016/j.renene.2022.07.085
Edward Kennedy, Z., & Arul Inigo Raja, M. (2021). Influence of stacking sequence and hybridization on the mechanical and tribological properties of glass and jute fiber composites. Materials Today: Proceedings, 55, 220–225. https://doi.org/10.1016/j.matpr.2021.06.294
El Bouch, S., Michel, O., & Comon, P. (2022). A normality test for multivariate dependent samples. Signal Processing, 201. https://doi.org/10.1016/j.sigpro.2022.108705
Fode, T. A., Chande Jande, Y. A., & Kivevele, T. (2023). Effects of different supplementary cementitious materials on durability and mechanical properties of cement composite – Comprehensive review. Heliyon, 9(7), e17924. https://doi.org/10.1016/j.heliyon.2023.e17924
Gravett, D. Z., Mourlas, C., Taljaard, V. L., Bakas, N., Markou, G., & Papadrakakis, M. (2021). New fundamental period formulae for soil-reinforced concrete structures interaction using machine learning algorithms and ANNs. Soil Dynamics and Earthquake Engineering, 144. https://doi.org/10.1016/j.soildyn.2021.106656
Hasanuddin, I., Mawardi, I., Nurdin, N., & Jaya, R. P. (2023). Evaluation of properties of hybrid laminated composites with different fiber layers based on Coir/Al2O3 reinforced composites for structural application. Results in Engineering, 17. https://doi.org/10.1016/j.rineng.2023.100948
Horváth, L., Kokoszka, P., & Wang, S. (2020). Testing normality of data on a multivariate grid. Journal of Multivariate Analysis, 179. https://doi.org/10.1016/j.jmva.2020.104640
Joe Qin, S., Guo, S., Li, Z., Chiang, L. H., Castillo, I., Braun, B., & Wang, Z. (2021). Integration of process knowledge and statistical learning for the Ddow data challenge problem. Computers and Chemical Engineering, 153. https://doi.org/10.1016/j.compchemeng.2021.107451
Karua, P., Arifuzzaman, M., & Islam, M. S. (2023). Effect of jute fiber reinforcement on the mechanical properties of expanded perlite particles-filled gypsum composites. Construction and Building Materials, 387. https://doi.org/10.1016/j.conbuildmat.2023.131625
Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., Arshad, H., & Zaidi, A. A. (2021). Natural fiber reinforced composites: Sustainable materials for emerging applications. In Results in Engineering (Vol. 11). Elsevier B.V. https://doi.org/10.1016/j.rineng.2021.100263
Kirubai, S., Padmavathy, S., Ganesh, N., & Rajaguru, K. (2022). Study of mechanical behaviour on jute fiber and rice straw reinforced hybrid silica filled composite material. Materials Today: Proceedings, 69, 1206–1212. https://doi.org/10.1016/j.matpr.2022.08.260
Kolkiewicz, A., Rice, G., & Xie, Y. (2021). Projection pursuit based tests of normality with functional data. Journal of Statistical Planning and Inference, 211, 326–339. https://doi.org/10.1016/j.jspi.2020.07.001
Kumar, A., & Kumar, N. (2023). A review on the electrically conductive transparent polymer composites: Materials and applications. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.07.211
Kurita, E., & Seo, T. (2022). Multivariate normality test based on kurtosis with two-step monotone missing data. Journal of Multivariate Analysis, 188. https://doi.org/10.1016/j.jmva.2021.104824
Li, M., Pu, Y., Thomas, V. M., Yoo, C. G., Ozcan, S., Deng, Y., Nelson, K., & Ragauskas, A. J. (2020). Recent advancements of plant-based natural fiber–reinforced composites and their applications. In Composites Part B: Engineering (Vol. 200). Elsevier Ltd. https://doi.org/10.1016/j.compositesb.2020.108254
Lu, J. J., Shi, Y. C., Guan, J. P., Dang, R. Q., Yu, L. C., Wang, H. Q., Hu, N. Di, & Shen, X. J. (2023). Enhanced mechanical properties of ramie fabric/epoxy composite laminates by silicon polymer. Industrial Crops and Products, 199. https://doi.org/10.1016/j.indcrop.2023.116778
Mahmud, S., Konlan, J., Deicaza, J., Schmidt, R. A., & Li, G. (2023). Thermoset polymer composites with gradient natural and synthetic fiber reinforcement: Self-healing, shape-memory, and fiber recyclability. Materials Today Communications, 35. https://doi.org/10.1016/j.mtcomm.2023.105950
Maithil, P., Gupta, P., & Chandravanshi, M. L. (2023). Study of mechanical properties of the natural-synthetic fiber reinforced polymer matrix composite. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.01.245
Majumder, A., Stochino, F., Frattolillo, A., Valdes, M., Mancusi, G., & Martinelli, E. (2023). Jute fiber-reinforced mortars: mechanical response and thermal performance. Journal of Building Engineering, 66. https://doi.org/10.1016/j.jobe.2023.105888
Mohammad Shohel, S., Hossain Riyad, S., & All Noman, A. (2023). Study to analyze the mechanical strength of composite glass fiber laminated with resin epoxy, resin polyester, and PVC foam under tensile loading conditions by numerically using finite element analysis via Ansys. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.05.062
Oteng-Abayie, E. F., Mensah, G., & Duodu, E. (2022). The role of environmental regulatory quality in the relationship between natural resources and environmental sustainability in sub-Saharan Africa. Heliyon, 8(12). https://doi.org/10.1016/j.heliyon.2022.e12436
Parvez, M. M. H., Nur Rupom, S. M., Adil, M. M., Tasnim, T., Rabbi, M. S., & Ahmed, I. (2023). Investigation of mechanical properties of rattan and bamboo fiber reinforced vinyl ester composite material for automotive application. Results in Materials, 19. https://doi.org/10.1016/j.rinma.2023.100437
Patil, S., Sudarsana Rao, H., & Ghorpade, V. G. (2023). The influence of metakaolin, silica fume, glass fiber, and polypropylene fiber on the strength characteristics of high performance concrete. Materials Today: Proceedings, 80, 577–586. https://doi.org/10.1016/j.matpr.2022.11.051
Rapino, L., Liu, L., Dinosio, A., Ripamonti, F., Corradi, R., & Baro, S. (2023). Processing of tyre data for rolling noise prediction through a statistical modelling approach. Mechanical Systems and Signal Processing, 188. https://doi.org/10.1016/j.ymssp.2022.110042
Rueda-Bayona, J. G., Cabello Eras, J. J., & Chaparro, T. R. (2022). Impacts generated by the materials used in offshore wind technology on Human Health, Natural Environment and Resources. Energy, 261. https://doi.org/10.1016/j.energy.2022.125223
Santosh Gangappa, G., & Sripad Kulkarni, S. (2020). Experimentation and validation of basalt & jute fiber reinforced in polymer matrix hybrid composites. Materials Today: Proceedings, 38, 2372–2379. https://doi.org/10.1016/j.matpr.2020.07.081
Senniangiri, N., Arunkumar, N., Dhanabal, A., Kamalakannan, K., & Thrisul, J. (2022). Production of polyethylene composites reinforced with sisal and jute fibres through compression molding. Materials Today: Proceedings, 68, 2362–2367. https://doi.org/10.1016/j.matpr.2022.09.103
Shakery, A., & Alizadeh, M. (2021). Mechanical properties and strength prediction of Al/E-glass fiber composites fabricated by cross accumulative roll bonding process. Journal of Manufacturing Processes, 69, 165–172. https://doi.org/10.1016/j.jmapro.2021.07.034
Sharma, R., & Gupta, A. (2023). A critical review on influencing parameters for adhesively bonded joints in composite laminates for structural applications. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.08.112
Shukla, S., & Mittal, A. (2022). Effect of jute fibre reinforcement on strength, thickness and cost of low-volume rural roads. Materials Today: Proceedings, 62(P12), 6749–6754. https://doi.org/10.1016/j.matpr.2022.04.848
Sriranga, B. K., Kirthan, L. J., & Ananda, G. (2021). The mechanical properties of hybrid laminates composites on epoxy resin with natural jute fiber and S-glass fibers. Materials Today: Proceedings, 46, 8927–8933. https://doi.org/10.1016/j.matpr.2021.05.363
Thomason, J. L. (2023). Flat glass fibres: The influence of fibre cross section shape on composite micromechanics and composite strength. Composites Part A: Applied Science and Manufacturing, 169. https://doi.org/10.1016/j.compositesa.2023.107503
Tong, L., Wang, X., Tong, J., Yi, X., Liu, X., & Rudd, C. (2023). Re-use of jute fiber hybrid nonwoven breather within laminated composite applications: A case study. Sustainable Materials and Technologies, 36. https://doi.org/10.1016/j.susmat.2023.e00621
Vadivel Vivek, V., Boopathi, C., Natarajan, N., L.Pradeesh, E., & Pravin, M. C. (2022). Exploration of mechanical properties of jute fiber and copper wire reinforced hybrid polymer composites. Materials Today: Proceedings, 66, 707–711. https://doi.org/10.1016/j.matpr.2022.04.012
Veeranjaneyulu, K., Kumar Chaturvedi, S., Joshi, S., & Sravanthi, G. (2023). Characterization of Kevlar jute hybrid composite. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.07.318
Wagh, J., Madgule, M., & Awadhani, L. V. (2023). Investigative studies on the mechanical behavior of Jute, Sisal, Hemp, and glass fiber-based composite material. Materials Today: Proceedings, 77, 969–976. https://doi.org/10.1016/j.matpr.2022.12.101
Xiao, J., Zhang, K., Ding, T., Zhang, Q., & Xiao, X. (2023). Fundamental Issues Towards Unified Design Theory of Recycled and Natural Aggregate Concrete Components. Engineering. https://doi.org/10.1016/j.eng.2023.03.017
Xie, X., Zhang, T., Wang, C., Yang, Y., Bogush, A., Khayrulina, E., Huang, Z., Wei, J., & Yu, Q. (2020). Mixture proportion design of pervious concrete based on the relationships between fundamental properties and skeleton structures. Cement and Concrete Composites, 113. https://doi.org/10.1016/j.cemconcomp.2020.103693.