Redesign of Production Floor Layout Using Systematic Layout Planning (SLP) Method

Mahesa Yudha  Erdiansyah; Joumil Aidil  SZS

doi:10.37385/ijedr.v5i2.5384

Authors

Mahesa Yudha Erdiansyah Universitas Pembangunan Nasional “Veteran” Jawa Timur
Joumil Aidil SZS Universitas Pembangunan Nasional “Veteran” Jawa Timur

DOI:

https://doi.org/10.37385/ijedr.v5i2.5384

Keywords:

Floor Layout, Systematic Layout Planning, Manufacturing

Abstract

PT XYZ is a manufacturing company engaged in printing and packaging, one of their products is wafer roll packaging. The problem that occurs in this company is the lack of consideration of the degree of nearness at work stations, the placement of work stations that are not in the sequence of the production process that causes backtracking. This research used Systematic Layout Planning (SLP) method and Blocplan Software to determine the layout redesign on production floor. From the research that was conducted, layout 4 was obtained as the best proposed layout with an R score of 0.88 and several changes were made to the position of the work station placement. The proposed layout obtained a total distance between work stations of 426 meters from the total distance between work stations of the initial layout that was 670 meters, which obtained a difference of total distance from work stations between initial layout and proposed layout was 244 meters.

References

Ali Naqvi, S. A., Fahad, M., Atir, M., Zubair, M., & Shehzad, M. M. (2016). Productivity improvement of a manufacturing facility using systematic layout planning. Cogent Engineering, 3(1), 1207296.

Gozali, L., Widodo, L., Nasution, S. R., & Lim, N. (2020, April). Planning the New Factory Layout of PT Hartekprima Listrindo using Systematic Layout Planning (SLP) Method. In IOP Conference Series: Materials Science and Engineering (Vol. 847, No. 1, p. 012001). IOP Publishing.

Haryanto, A. T., Hisjam, M., & Yew, W. K. (2021, March). Redesign of facilities layout using Systematic Layout Planning (SLP) on manufacturing company: a case study. In IOP Conference Series: Materials Science and Engineering (Vol. 1096, No. 1, p. 012026). IOP Publishing.

Haekal, J., & Adi, D. (2020). Planning of production facilities layouts in home industry with the systematic layout planning method. International Journal of Innovative Science, Engineering & Technology, 7(10), 147-153.

Islam, M. A., Rashed, C. A. A., & Hasan, J. (2017). Productivity improvement through the application of systematic layout planning. Review of General Management, 25(1), 38-54.

Jain, S., & Yadav, T. K. (2017). Systematic layout planning: A review of improvement in approach to pulse processing mills. International Research Journal of Engineering and Technology (IRJET), 4(5), 503-7.

Khariwal, S., Kumar, P., & Bhandari, M. (2021). Layout improvement of railway workshop using systematic layout planning (SLP)–A case study. Materials Today: Proceedings, 44, 4065-4071.

Lin, Q. L., Liu, H. C., Wang, D. J., & Liu, L. (2015). Integrating systematic layout planning with fuzzy constraint theory to design and optimize the facility layout for operating theatre in hospitals. Journal of Intelligent Manufacturing, 26, 87-95.

Liu, H., Liu, X., Lin, L., Islam, S. M., & Xu, Y. (2020). A study of the layout planning of plant facility based on the timed Petri net and systematic layout planning. PLoS One, 15(9), e0239685.

Potadar, O. V., & Kadam, G. S. (2019). Development of facility layout for medium-scale industry using systematic layout planning. In Proceedings of International Conference on Intelligent Manufacturing and Automation: ICIMA 2018 (pp. 473-483). Springer Singapore.

Singh, A. P., & Yilma, M. (2013, May). Production floor layout using systematic layout planning in Can manufacturing company. In 2013 International Conference on Control, Decision and Information Technologies (CoDIT) (pp. 822-828). IEEE.

Suhardi, B., Juwita, E., & Astuti, R. D. (2019). Facility layout improvement in sewing department with Systematic Layout planning and ergonomics approach. Cogent Engineering, 6(1), 1597412.

Suhardini, D., Septiani, W., & Fauziah, S. (2017, December). Design and simulation plant layout using systematic layout planning. In IOP Conference Series: Materials Science and Engineering (Vol. 277, No. 1, p. 012051). IOP Publishing.

Watanapa, A., & Wiyaratn, W. (2012). Systematic layout planning to assist plant layout: case study pulley factory. Applied mechanics and materials, 110, 3952-3956.